TH-PHD-2023-003
Akshay Malige
mailme.akshaym@gmail.com
PANDOC-5605-Thesis-2023-20260914_153406.pdf
(10.77 MB)
Piotr Salabura
Forward Tracker (FT) developed for the PANDA - HADES experiments, will be used for tracking and identification of charged particles in the forward regions by measuring the drift-time and the energy loss with the Time Over Threshold (TOT) method of the track. In the thesis, the methods required to achieve the energy and position resolution for the tracker are developed and evaluated in two stages. In the first stage, the detector and readout calibration methods are developed to endow uniform gain characteristics from a large number of detector channels. These methods are also used for the qualification of PASTTRECv3 ASIC (PANDA Straw Tube Tracker REadout Chip, Application Specific Integrated Circuit) developed for the FT. The obtained calibration parameters are validated by tracking the performance of prototypes of straw tubes under realistic beam conditions inside the HADES
experiment and prototypes of the PANDA detectors. In the second stage, a Data AcQuisition (DAQ) system performing online event selection, filtering and particle track reconstruction on FPGA-based hardware has been developed and evaluated in experiments using proton beams and cosmic rays.
The application of online event processing in FT will accelerate event processing and introduce data reduction, which is one of the components of the DAQ system in the PANDA experiment. The FT detector setup and the DAQ have been integrated for the HADES experiment and the successful operation of the detector in the full system run has confirmed the effectiveness of the developed methods.
experiment and prototypes of the PANDA detectors. In the second stage, a Data AcQuisition (DAQ) system performing online event selection, filtering and particle track reconstruction on FPGA-based hardware has been developed and evaluated in experiments using proton beams and cosmic rays.
The application of online event processing in FT will accelerate event processing and introduce data reduction, which is one of the components of the DAQ system in the PANDA experiment. The FT detector setup and the DAQ have been integrated for the HADES experiment and the successful operation of the detector in the full system run has confirmed the effectiveness of the developed methods.

