In the future hadron facility FAIR the HESR ring will supply antiprotons in the momentum range 1.5-15 GeV/c as projectiles for charm, strangeness and Form Factor physics. For all the reactions it will be necessary to use internal targets and in particular, for the double strangeness production, a solid 12C target will be used. Inserting a solid target inside an antiproton ring creates two main problems: a large background on the detectors due to the overwhelming amount of annihilations and a strong depletion of the beam due to all the hadronic and Coulomb interactions of the antiprotons with the 12C nuclei. The width of the target plays a crucial role in minimizing these unwanted eects. Two wire-shaped prototypes have been already realized, starting from a thin diamond disk. The wire shape has been obtained by using a femto-edge laser. One prototype has been submitted to irradiation by protons of 1.5 MeV and to simultaneous Back-Scattering control to test the impurity level, the surface 12C density, the radiation hardness and eventual phase modications during irradiation. Both the prototypes have been submitted to Micro-Raman spectroscopy in order to scan the carbon phases along the width. The results show performances which satisfy the experimental requirements.

The $\overline{\text{P}}\text{ANDA}$-experiment will be one of the main experiments at the upcoming Facility for Antiproton and Ion Research (FAIR) at the GSI in Darmstadt. The fixed target experiment will explore $\overline{\text{p}}$p annihilations in the charm mass region with intense, phase space cooled beams with momenta between 1.5 and 15 GeV/c. The innermost subdetector of $\overline{\text{P}}\text{ANDA}$ will be the Micro Vertex Detector (MVD) and consists of silicon strip and pixel detectors. The MVD can be further divided into two sub-structures. A barrel-structure around the vertex and a disc-structure in beam direction with six disks of different size. The last two disks are hybrid disks with trapezoidal strip sensors in the outer layer surrounding a smaller ring of pixel sensors in the inner part. The other disks are made only out of pixel detectors. The first trapezoidal prototype sensors were produced by CiS\footnote{Forschungsinstitut f\"ur Mikrosensorik und Photovoltaik GmbH} and have a stereo angle of $15^{\circ}$ with 512 strips per sensor side and a strip pitch of $67.5\,\mu\text{m}$. In order to operate and test the prototype sensors, they were chracterized with a probestation as well as with a dedicated testboard. A first beam test was done at COSY\footnote{Cooler Synchrotron at Forschungszentrum J\"ulich GmbH} with protons of $2.95\,\text{GeV/c}$ and $800\,\text{MeV/c}$ in December 2013 and January 2014.